LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> 6 Signature >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Horn Removal/Installation

Horn Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the set plate. (See SET PLATE REMOVAL/INSTALLATION .)
  3. Remove the fresh-air duct installation bolts. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [SKYACTIV-G 2.5T] .) (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION)] .) (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [SKYACTIV-G 2.5 (WITHOUT CYLINDER DEACTIVATION)] .)
  4. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION .)
  5. Disconnect the connector.
    Fig 1: Horn, Connector, Ground, Bolts With Torque Specification
    G12237621Courtesy of MAZDA MOTORS CORP.
  6. Remove the bolt.
  7. Remove the ground. (RH only)
  8. Remove the horn.
  9. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals