LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> 6 Signature >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Splash Shield Removal/Installation >> Rear Splash Shield

Rear Splash Shield

  1. Remove the screws.
    Fig 1: Rear Splash Shield, Fasteners, Cap Nut And Screws
    G12234871Courtesy of MAZDA MOTORS CORP.
  2. Remove the fasteners.
  3. Remove the cap nut.
  4. Remove the rear splash shield.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals