DTC Table (Start Stop Unit): Notes

Immobilizer System

x: Applicable-: Not applicable

DTC				KEY Warning Light (Red)(3)	Push Button Start Indicator Light Amber)	Description	Fail-Safe	Drive Cycle	Self Test Type(2)	Memory Function	Refer To
M-MDS Display(1)
Start Stop Unit											PCM
U3000:96	P1260:00	09		On	Flash	Start stop unit malfunction	-	-	C	x	(See SECURITY INDICATOR LIGHT: 09, DTC: U3000:96/P1260:00 (START STOP UNIT) .
B10D9:87	P1260:00	11		-	Flash	Coil antenna (built into push button start) error	-	-	C	-	(See SECURITY INDICATOR LIGHT: 11, DTC: B10D9:87/P1260:00 (START STOP UNIT) .)
B13D3:05	P1260:00	13		-	-	Remote transmitter program error	-	-	C	-	(See SECURITY INDICATOR LIGHT: 13, DTC: B13D3:05/P1260:00 (START STOP UNIT) .)
B13D3:94	P1260:00	13		-	-	Communication error with remote transmitter	-	-	C	-	(See SECURITY INDICATOR LIGHT: 13, DTC: B13D3:94/P1260:00 (START STOP UNIT) .)
B13D3:51	P1260:00	15		-	Flash	Unregistered remote transmitter is detected	-	-	C	-	(See SECURITY INDICATOR LIGHT: 15, DTC: B13D3:51/P1260:00 (START STOP UNIT) .)
U0100:87	P1260:00	16		-	-	Communication error with PCM (no response or data mismatch)	-	-	C	-	(See SECURITY INDICATOR LIGHT: 16, DTC: U0100:87/P1260:00 (START STOP UNIT) .)
B13D4:00	P1260:00	21		On	-	Insufficient remote transmitter programming number	-	-	C	-	(See SECURITY INDICATOR LIGHT: 21, DTC: B13D4:00/P1260:00 (START STOP UNIT) .)
B10DA:51	P1260:00	22		-	-	Communication error with PCM (data received failure)	-	-	C	-	(See SECURITY INDICATOR LIGHT: 22, DTC: B10DA:51/P1260:00 (START STOP UNIT) .)
B10DA:62	P1260:00	23		-	-	Communication error with PCM (code mismatched)	-	-	C	-	(See SECURITY INDICATOR LIGHT: 23, DTC: B10DA:62/P1260:00 (START STOP UNIT) .)
(1) The letters at the beginning of each DTC are only displayed when using the M-MDS, and refer to the following: B= Body system, P= Powertrain system, U= Network communication system. (2) C: CMDTC self test, D: ODDTC self test (3) Instrument cluster (Type C)