Shift Control Module Removal/Installation: Installation

Verify that the shift control module is in the neutral position.
NOTE:
- If the shift control module is in the neutral position, the shift lever with the weight can be moved up and down to a large extent.
Fig 1: Shift Lever With Weight Moving Up And Down
Courtesy of MAZDA MOTORS CORP.

Install the shift control module in the order shown in the figure

Fig 2: Installing Shift Control Module With Torque Specifications

Courtesy of MAZDA MOTORS CORP.

COMPONENT DESCRIPTION

Install the back-up light switch in the order shown in the figure

Fig 3: Installing Back-Up Light Switch With Torque Specifications

Courtesy of MAZDA MOTORS CORP.

COMPONENT DESCRIPTION

Install the detent ball pin in the order shown in the figure

Fig 4: Installing Detent Ball Pin With Torque Specifications

Courtesy of MAZDA MOTORS CORP.

COMPONENT DESCRIPTION

Install the neutral switch in the order shown in the figure

Fig 5: Installing Neutral Switch

Courtesy of MAZDA MOTORS CORP.

COMPONENT DESCRIPTION

Connect the control cable to the transaxle.

Fig 6: Connecting Control Cable To Transaxle
Courtesy of MAZDA MOTORS CORP.
Make sure that the shift lever can be shifted smoothly.
Install the battery tray and battery. (See BATTERY REMOVAL/INSTALLATION .)
Install the air cleaner and air hose as a single unit. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
Connect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
Install the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION .)