DTC U0115-00; Communication Error To Pcm: Notes
DETECTION CONDITION & POSSIBLE CAUSE
| DTC U0115:00 |
Communication Error to PCM (local CAN between TCM and PCM) |
| DETECTION CONDITION |
- Under the following condition, the TCM cannot receive the signal from PCM (local CAN between TCM and PCM):
- Battery voltage is 10 V or more.
|
| FAIL-SAFE FUNCTION |
- Set to TCC control.
- Inhibits learning control.
- Inhibits manual mode.
- Inhibits neutral idle control.
- Inhibits AAS.
- Inhibits 5GR and 6GR.
- Inhibits shift down when the accelerator pedal is depressed.
|
| POSSIBLE CAUSE |
- PCM DTC is stored.
- PCM malfunction
- TCM malfunction
|
| SYSTEM WIRING DIAGRAM |
Not applicable |