Resistance inspection

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
2. Disconnect the MAP sensor/IAT sensor No. 2 connector.
3. Remove the MAP sensor/IAT sensor No. 2. (See MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR No. 2 REMOVAL/INSTALLATION .)
4. Measure the resistance between MAP sensor/IAT sensor No. 2 terminals A and B.

Fig 1: Locating MAP Sensor/IAT Sensor No. 2 Terminals A And B

Courtesy of MAZDA MOTORS CORP.

• If not as specified, replace the MAP sensor/IAT sensor No. 2. (See MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR No. 2 REMOVAL/INSTALLATION .)

Specification (Reference) 

Fig 2: MAP Sensor/IAT Sensor No. 2 Resistance Graph

Courtesy of MAZDA MOTORS CORP.