LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> 3 Touring, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Intake-Air System >> Accelerator Pedal Removal/Installation

Accelerator Pedal Removal/Installation

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove in the order indicated in the table.
    Fig 1: Removing/Installing Accelerator Pedal Components With Torque Specification
    G11549851Courtesy of MAZDA MOTORS CORP.
    COMPONENT DESCRIPTION

    1 APP sensor connector
    2 Accelerator pedal
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals