LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> 3 Touring, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Indicator Unit Inspection >> LED Illumination Inspection >> When using M-MDS

When using M-MDS

  1. Connect the M-MDS to the DLC-2.
  2. After vehicle identification, select the following from the M-MDS initialization screen.
    1. "Data logger"
    2. "Module"
    3. "IC"
  3. Using "LCD_SEG", verify that the following warning/indicator lights are turned on.
    Fig 1: Checking Indicator/Warning Lights
    G11564707Courtesy of MAZDA MOTORS CORP.
    • If any one of the warning/indicator lights is not displayed, replace the indicator unit.
scientia non olet · About LEMON Manuals