LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> 3 Touring, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System (Service Information) >> DSC Off Switch Inspection >> LED Illumination Inspection

LED Illumination Inspection

  1. Remove the cluster switch. (See CLUSTER SWITCH REMOVAL/INSTALLATION .)
  2. Apply battery positive voltage to cluster switch terminal J, and connect terminal I to ground.
    Fig 1: Connecting Battery Positive Voltage To Cluster Switch Terminal J
    G09785880Courtesy of MAZDA MOTORS CORP.
  3. Verily that the LED illuminates.
    • If there is any malfunction, replace the cluster switch.
scientia non olet · About LEMON Manuals