LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2018 >> 3 Sport, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Glass/Windows/Mirrors >> Auto-Dimming Mirror Removal/Installation >> Without Forward Sensing Camera (FSC)

Without Forward Sensing Camera (FSC)

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the screw.
    Fig 1: Removing Screw
    G11448971Courtesy of MAZDA MOTORS CORP.
  3. Remove the auto-dimming mirror in the direction of the arrow shown in the figure.
    Fig 2: Removing Auto-Dimming Mirror
    G11448972Courtesy of MAZDA MOTORS CORP.
  4. Detach the tabs while pressing the cover No. 2 in the direction of the arrows (1) shown in the figure, then remove the cover No. 2 in the direction of the arrow (2).
    Fig 3: Removing Cover
    G11448973Courtesy of MAZDA MOTORS CORP.
  5. Disconnect the auto-dimming mirror connector.
    Fig 4: Disconnecting Auto-Dimming Mirror Connector
    G09076759Courtesy of MAZDA MOTORS CORP.
  6. Remove the auto-dimming mirror in the direction of the arrow from the mirror base.
    Fig 5: Removing Auto-Dimming Mirror From Mirror Base
    G11448975Courtesy of MAZDA MOTORS CORP.
  7. Install in the reverse order of removal.