Fuel Tank Installation Note

1. Install the following parts as a single unit:
   • Fuel tank
   • Insulator
   • Fuel pump unit
   • Pressure control valve (U. S. A. and CANADA specs).
   • Evaporative hose No. 2 (Except U. S. A. and CANADA specs).
2. Temporarily tighten the bolt as shown in the figure below.
   Fig 1: Tightening Fuel Tank With Bolt

   Courtesy of MAZDA MOTORS CORP.
3. Tighten the bolt as shown in the figure below.
   Fig 2: Tightening Fuel Tank With Bolt

   Courtesy of MAZDA MOTORS CORP.

   Tightening torque 

   22-30 N.m {2.3-3.0 kgf.m, 17-22 ft.lbf}

4. Tighten the bolt as shown in the figure below.

Fig 3: Tightening Fuel Tank With Bolts

Courtesy of MAZDA MOTORS CORP.

Tightening torque 

22-30 N.m {2.3-3.0 kgf.m, 17-22 ft.lbf}