Continuity Inspection
- Verify that the CPP switch is installed properly. (See CLUTCH PEDAL POSITION SWITCH REMOVAL/INSTALLATION ).
- Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION ).
- Disconnect the CPP switch connector.
- Verify that the continuity between CPP switch terminals A and B when the clutch pedal is depressed and when it is released is according to the following table:
- If not as verified, replace the CPP switch. (See CLUTCH PEDAL POSITION SWITCH REMOVAL/INSTALLATION ).
CLUTCH PEDAL POSITION SPECIFICATION
| Clutch pedal position | Continuity |
|---|---|
| Clutch pedal released (Rod is pressed). |
No continuity |
| Clutch pedal depressed (Rod is not pressed). |
Continuity detected |