DSC Off Switch Inspection

NOTE:

The DSC OFF switch is integrated with the cluster switch.
If the DSC OFF switch is replaced, replace the cluster switch. (See CLUSTER SWITCH REMOVAL/INSTALLATION ).

Remove the cluster switch. (See CLUSTER SWITCH REMOVAL/INSTALLATION ).
Measure the resistance between cluster switches B and C under the following conditions:

Fig 1: Checking Cluster Switches Resistance

Courtesy of MAZDA MOTORS CORP.

If not within the specification, replace the cluster switch.
Resistance with DSC OFF switch pressed and held (standard)
0 ohm
Resistance with any switches not pressed (standard)
1, 139.99-1, 163.01 ohms