LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> MX-5 Miata Club, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle Shift Mechanism) >> Automatic Transmission Shift Mechanism Removal/Installation >> Control Rod Removal/Installation >> TWC Installation Note

TWC Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Remove the tunnel member temporarily.
    Fig 1: Identifying Tunnel Member Bolts
    G11279121Courtesy of MAZDA MOTORS CORP.
  2. Install the TWC to the exhaust manifold (WU-TWC). (See EXHAUST SYSTEM REMOVAL/INSTALLATION [SKYACTIV-G 2.0] ).
scientia non olet · About LEMON Manuals