Front Stabilizer Control Link Inspection: Notes

1. Remove the front stabilizer control link. (See FRONT STABILIZER REMOVAL/INSTALLATION ).
2. Inspect the front stabilizer control link for bends or damage.
   • If there is any malfunction, replace the front stabilizer control link. (See FRONT STABILIZER REMOVAL/INSTALLATION ).
3. Rotate and shake the front stabilizer control link ball joint 10 times.
4. Measure the front stabilizer control link ball joint rotational torque using an Allen wrench and a torque wrench.

Fig 1: Measuring Front Stabilizer Control Link Ball Joint Rotational Torque

Courtesy of MAZDA MOTORS CORP.