DTC C101F-98: Overheat Protection Control: Notes
WARNING: This page is about a different car, the 2016 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
| DTC |
C101F:98 |
Overheat protection control |
| DETECTION CONDITION |
- Pump motor, traction control solenoid valve and stability control solenoid valve is forcibly operated for 30 s or more is detected.
- Inlet solenoid valve is forcibly operated for 120 s or more and outlet solenoid valve is forcibly operated for 30 s or more is detected.
|
| FAIL-SAFE FUNCTION |
- Refer to "Fail-safe function table". (See DTC TABLE .)
|
| POSSIBLE CAUSE |
- Overheating protection control is performed to protect solenoid valve inside DSC HU/CM, however, this is not a malfunction
|
| SYSTEM WIRING DIAGRAM |
- |