LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> MX-5 Miata Club, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical System >> Timing Chain Removal/Installation >> Water Outlet Component Removal Note

Water Outlet Component Removal Note

  1. Disconnect the upper radiator hose.
    Fig 1: Identifying Upper Radiator Hose
    G11275882Courtesy of MAZDA MOTORS CORP.
  2. Disconnect the heater hose.
    Fig 2: Identifying Heater Hose
    G11275883Courtesy of MAZDA MOTORS CORP.
  3. Set the engine coolant temperature sensor No. 1 wiring harness aside using the following procedure:
    Fig 3: Identifying Engine Coolant Temperature Sensor No. 1 Connector And Clip
    G11275884Courtesy of MAZDA MOTORS CORP.
    1. Disconnect the engine coolant temperature sensor No. 1 connector.
    2. Remove the clip and set the wiring harness aside.
  4. Remove the water outlet component.
Fig 4: Removing Water Outlet Component
G11275885Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals