Washer Fluid-Level Sensor Inspection

1. Turn the steering wheel to full right lock.
2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION ).
3. Lift up the vehicle.
4. Remove the front mudguard No. 2. (See FRONT MUDGUARD REMOVAL/INSTALLATION ).
5. Disconnect the connector.
   Fig 1: Identifying Washer Fluid Level Sensor, Washer Tank And Connector

   Courtesy of MAZDA MOTORS CORP.
6. Verify that the continuity between the washer fluid-level sensor terminals is as indicated in the table.

Fig 2: Washer Fluid Level Sensor Terminals Continuity Chart

Courtesy of MAZDA MOTORS CORP.

Fig 3: Checking Washer Fluid Level Sensor Terminals Continuity

Courtesy of MAZDA MOTORS CORP.

• If not as indicated in the table, replace the washer fluid-level sensor. (See WASHER FLUID-LEVEL SENSOR REMOVAL/INSTALLATION ).