LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> MX-5 Miata Club, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Entertainment System >> Center Display Removal/Installation

Center Display Removal/Installation

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION ).
  2. Remove the following parts:
    1. Scuff plate (passenger's side) (See SCUFF PLATE REMOVAL/INSTALLATION ).
    2. Front side trim (passenger's side) (See FRONT SIDE TRIM REMOVAL/INSTALLATION ).
    3. A-pillar trim (passenger's side) (See A-PILLAR TRIM REMOVAL/INSTALLATION ).
    4. Passenger-side lower panel (See PASSENGER-SIDE LOWER PANEL REMOVAL/INSTALLATION ).
    5. Center panel No. 2 (See CENTER PANEL NO. 2 REMOVAL/INSTALLATION ).
    6. Meter hood (See METER HOOD REMOVAL/INSTALLATION ).
  3. Remove the bolt.
    Fig 1: Identifying Center Display And Bolt With Torque Specifications
    G11274706Courtesy of MAZDA MOTORS CORP.
  4. Pull the center display component in the direction of the arrows shown in the figure and detach the center display clips from the dashboard.
    Fig 2: Removing Center Display Clips From Dashboard
    G11274707Courtesy of MAZDA MOTORS CORP.
  5. Pull out the center display component in the direction of the arrow shown in the figure and disconnect it.
    Fig 3: Removing Center Display Component
    G11274708Courtesy of MAZDA MOTORS CORP.
  6. Remove the center display component.
  7. Remove the connectivity master unit (CMU) when replacing the center display. (See CONNECTIVITY MASTER UNIT (CMU) REMOVAL/INSTALLATION ).
  8. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals