LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-9 Touring, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Generator Disassembly/Assembly [SKYACTIV-G 2.5T] >> Brush Assembly Note

Brush Assembly Note

CAUTION:
  • Melt the solder quickly, otherwise the diodes (rectifier) and brush holder will be damaged by excessive heat.
Fig 1: Caution - Melt Solder Quickly, Otherwise Diodes (Rectifier) And Brush Holder Will Be Damaged By Excessive Heat
G11436020Courtesy of MAZDA MOTORS CORP.
  1. Press the brush into the brush holder with it facing in the direction shown in the figure.
    Fig 2: Pressing Brush Into Brush Holder
    G11436022Courtesy of MAZDA MOTORS CORP.
  2. Solder the brush to the brush holder.
scientia non olet · About LEMON Manuals