DTC P250F-00; Engine Oil Level Signal: Engine Oil Level Low: Notes

NOTE:

To determine the malfunctioning part, proceed with the diagnostics from "Function Inspection Using M-MDS".

Details On DTCs

DETECTION CONDITION AND POSSIBLE CAUSE

DESCRIPTION	Engine oil level signal: engine oil level low
DETECTION CONDITION	Determination conditions	The engine oil level has decreased around or below MIN mark. (5 mm {0.197 in} below MIN mark on dipstick)
	Preconditions	Engine speed: 600-2, 000 rpm Vehicle speed: 5 km/h {3 mph} or more Engine oil control: during low oil pressure Engine oil temperature: 20-90 °C {68-194 °F} The following DTC is not detected: Communication error between engine oil level sensor and PCM: U1100:00 Engine oil temperature sensor: P0197:00, P0198:00 Engine oil level sensor power supply circuit: P250C:00
	Drive cycle	1
	Self test type	CMDTC self test
	Sensor used	PCM Engine oil level sensor Engine oil temperature sensor Low-G (XY) sensor (built-into SAS control module)
FAIL-SAFE FUNCTION	Not applicable
VEHICLE STATUS WHEN DTCs ARE OUTPUT	Illuminates the engine oil level warning light.
POSSIBLE CAUSE	Improper engine oil level (low) Engine oil leakage PCM malfunction

System Wiring Diagram

Not applicable