Using the M-MDS
- Connect the M-MDS to the DLC-2.
- After vehicle identification, select the following from the M-MDS initialization screen.
- Select "Data logger"
- Select "Module"
- Select "IC"
- Using the simulation function SPEEDOMTR, verify that the values are as indicated in the table.
| M-MDS display | Speedometer display |
|---|---|
| 60 km/h | Speedometer needle moves to approx. 57.75-62.25 km/h {35.89-38.68 mph}. |
| 120 km/h | Speedometer needle moves to approx. 117-123 km/h {72.8-76.4 mph}. |
| Off | Speedometer needle moves to the bottommost position. |
- If not as indicated in the table, replace the instrument cluster. (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION .)