LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Touring, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Systems >> Fuse Block Removal/Installation >> Removal

Fuse Block Removal/Installation: Removal

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Font scuff plate (LH) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
    2. Front side trim (LH) (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
    3. LF control unit (with advanced keyless entry system) (See LF CONTROL UNIT REMOVAL/INSTALLATION .)
  3. Remove all the fuses.
  4. Remove the bolt.
    Fig 1: Removing Fuse Block Bolt
    G11426322Courtesy of MAZDA MOTORS CORP.
  5. Remove the fuse block clip from the body.
  6. Remove the cover.
    Fig 2: Removing Fuse Block Clip From Body
    G11426323Courtesy of MAZDA MOTORS CORP.
  7. Set the removed fuse block aside so that it does not scratch the vehicle and parts.
scientia non olet · About LEMON Manuals