Transfer Oil Inspection

Replacement Part 

Washer

Quantity: 1

Location of use: Oil level plug

Oil and Chemical Type 

Transfer oil 

Type: MAZDA LONG LIFE HYPOID GEAR OIL SG1

1. Park the vehicle on level ground.
2. Remove the oil level plug with the washer.
   Fig 1: Removing Oil Level Plug With Washer

   Courtesy of MAZDA MOTORS CORP.
3. Checking by hand, verify that the oil is near the brim of the plug hole.
   • If the oil level is low, add the specified amount and type of oil through the oil level plug hole.

   Transfer oil type

   MAZDA LONG LIFE HYPOID GEAR OIL SG1

4. Tighten the oil level plug with a new washer.

Fig 2: Installing Oil Level Plug With Washer

Courtesy of MAZDA MOTORS CORP.

Tightening torque 

40-58 N.m {4.1-5.9 kgf.m, 30-42 ft.lbf}