DTC B00B5-55: Configuration Setting Error (Seat Track Position Sensor Structural Malfunction): Notes

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Though the vehicle is not equipped with a seat track position sensor, DTC B00B5:55 for the configuration setting of the seat track position sensor may present.

System malfunction location	Configuration setting error (seat track position sensor structural malfunction)
Detection condition	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. SAS control module configuration setting has not been done correctly. SAS control module malfunction
Fail-safe	-
Possible cause	Though the vehicle is not equipped a seat track position sensor, SAS control module is configured for use with the seat track position sensor. SAS control module malfunction
System wiring diagram	-