DTC B00A0-54: Occupant Classification Sensor Calibration Setting Not Set: Notes
WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
| System malfunction location |
- Occupant classification sensor calibration setting not set
|
| Detection condition |
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- Occupant classification sensor calibration setting has not been done correctly
|
| Fail-safe |
- |
| Possible cause |
- Occupant classification sensor calibration setting not implemented
- Occupant classification sensor calibration setting invalid
- Occupant classification sensor control module malfunction
|
| System wiring diagram |
- |