Diagnostic Procedure
WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
| STEP | Inspection | Action | |
|---|---|---|---|
| 1 | VERIFY FRONT BODY CONTROL MODULE (FBCM) DTCs AGAIN
|
Yes | Go to the next step. |
| No | Go to Step 5. | ||
| 2 | INSPECT LIGHT SWITCH
|
Yes | Go to the next step. |
| No | Replace the light switch, then go to Step 4. (See LIGHT SWITCH REMOVAL/INSTALLATION .) |
||
| 3 | PERFORM DTC INSPECTION AND VERIFY IF MALFUNCTIONING PART IS START STOP UNIT
|
Yes | Replace the start stop unit, then go to the next step. (See START STOP UNIT REMOVAL/INSTALLATION .) |
| No | Go to Step 5. | ||
| 4 | VERIFY THAT REPAIRS HAVE BEEN COMPLETED
|
Yes | Replace the front body control module (FBCM), then go to the next step. (See FRONT BODY CONTROL MODULE (FBCM) REMOVAL/INSTALLATION .) |
| No | Go to the next step. | ||
| 5 | VERIFY IF OTHER DTCs DISPLAYED
|
Yes | Repair the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [FRONT BODY CONTROL MODULE (FBCM)] .) |
| No | DTC troubleshooting completed. | ||