DTC U2300-55; Instrument Cluster Configuration Not Implemented: Notes

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

DETECTION CONDITION & POSSIBLE CAUSE

Description	Instrument cluster configuration not implemented
Detection condition	Blind spot monitoring (BSM) control module received a signal which indicates the instrument cluster configuration is not performed.
Fail-safe	Blind spot monitoring (BSM) system is stopped.
Possible cause	NOTE: To correctly write the configuration data sent from the instrument cluster to the blind spot monitoring (BSM) control module to the blind spot monitoring (BSM) control module, 30 s or more need to have elapsed since the ignition was switched ON (engine off or on). Instrument cluster configuration is not completed. Instrument cluster malfunction Blind spot monitoring (BSM) control module malfunction
System wiring diagram	Not applicable