PID/Data Monitor Table [SAS Control Module (Standard Deployment Control System)]

SM1263006

PID	Unit/Condition	Data contents	SAS control module terminal
AB_WL (Air bag system warning light status)	Lamp_Off/Lamp_On/Plant_Mode/Unknown	Air bag system warning light off: Lamp_Off Air bag system warning light on: Lamp_On Air bag system warning light flashing: Plant_Mode Air bag system warning light unrecognized: Unknown	3Q, 3S
P_SEAT_M_S (Occupancy sensor)	Off/On	Not occupant seated in passenger-side front seat: Off Occupant seated in passenger-side front seat: On	2AA
RES_C_AB_D (Driver-side curtain air bag module resistance nominal)	ohm	Continuous: 0.88-6.33 ohms	1W, 1U
RES_C_AB_P (Passenger-side curtain air bag module resistance nominal)	ohm	Continuous: 0.88-6.33 ohms	1AA, 1Z
RES_F_AB1_D (Driver-side air bag module (inflator No. 1) resistance nominal)	ohm	Continuous: 1.37-6.33 ohms	3C, 3G
RES_F_AB1_P (Passenger-side air bag module (inflator No. 1) resistance nominal)	ohm	Continuous: 0.88-6.33 ohms	3K, 3N
RES_S_AB_D (Driver-side side air bag module resistance nominal)	ohm	Continuous: 0.88-10.53 ohms	1C, 1G
RES_S_AB_P (Passenger-side side air bag module resistance nominal)	ohm	Continuous: 0.88-10.53 ohms	1K, 1N
RES_SB_P_D (Driver-side pre-tensioner seat belt resistance nominal)	ohm	Continuous: 0.88-6.33 ohms	2C, 2G
RES_SB_P_P (Passenger-side pre-tensioner seat belt resistance nominal)	ohm	Continuous: 0.88-6.33 ohms	2K, 2N
PCD_A (Poorly connected detector bar terminal voltage nominal (SAS control module connector A))	V	Normal connected: 270.9 mV or less Poor connected: 3173.4 mV or more	1a, 1b
PCD_B (Poorly connected detector bar terminal voltage nominal (SAS control module connector B))	V	Normal connected: 270.9 mV or less Poor connected: 3173.4 mV or more	2a, 2b
PCD_C (Poorly connected detector bar terminal voltage nominal (SAS control module connector C))	V	Normal connected: 270.9 mV or less Poor connected: 3173.4 mV or more	3a, 3b
SEAT_B_D (Driver-side buckle switch status)	Unbuckled/Buckled	Driver-side front seat belt fastened (Driver-side buckle switch off): Buckled Driver-side front seat belt not fastened (Driver-side buckle switch on): Unbuckled	2U
SEAT_B_P (Passenger-side buckle switch status)	Unbuckled/Buckled	Passenger-side front seat belt fastened (Passenger-side buckle switch off): Buckled Passenger-side front seat belt not fastened (Passenger-side buckle switch on): Unbuckled	2W
VPWR_IGA (SAS control module power voltage)	V	Ignition is switched ON: IG1 voltage	2AD