LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-3 Touring, FWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Basic System - HVAC >> Resistor Inspection

Resistor Inspection

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
    2. Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION .)
  3. Verify that the resistance between the resistor terminals is as shown in the table.
    Fig 1: Measuring Resistance Between Resistor Terminals
    G11431340Courtesy of MAZDA MOTORS CORP.
    • If there is any malfunction, replace the resistor.
Terminal Resistance (ohm)
A-D 0.54
A-B 1.47
A-C 3.92
scientia non olet · About LEMON Manuals