LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-3 Touring, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical System >> Timing Chain Removal/Installation >> Water Pump Pulley Removal Note

Water Pump Pulley Removal Note

CAUTION:
  • Be careful not to damage the belt groove and surface of the water pump pulley when using tools, otherwise it will cause wear, breakage, abnormal noise of the drive belt (stretch belt), damage to the pulley, and rust.
  1. Align the water pump pulley hole with the water pump hole as shown in the figure.
    Fig 1: Aligning Water Pump Pulley Hole With Water Pump Hole
    G09785085Courtesy of MAZDA MOTORS CORP.
  2. Insert an appropriate bolt (length approx. 70 mm {2.8 in}) into the water pump hole as shown in the figure, and lock the water pump pulley against rotation.
    Fig 2: Inserting Appropriate Bolt Into Water Pump Hole
    G09785086Courtesy of MAZDA MOTORS CORP.
  3. Remove the water pump pulley.
  4. Remove the bolt used for locking the water pump pulley against rotation.
scientia non olet · About LEMON Manuals