Washer Fluid-Level Sensor Inspection

Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
Remove the front bumper. (See FRONT BUMPER REMOVAL .) (See FRONT BUMPER INSTALLATION .)
Disconnect the connectors. (See WASHER FLUID-LEVEL SENSOR REMOVAL/INSTALLATION .)
Verify that the continuity between the washer fluid-level sensor terminals is as indicated in the table.

Fig 1: Washer Fluid-Level Sensor Terminals Continuity Chart
Courtesy of MAZDA MOTORS CORP.

Fig 2: Checking Continuity Between Washer Fluid-Level Sensor Terminals
Courtesy of MAZDA MOTORS CORP.
- If not as indicated in the table, replace the washer fluid-level sensor. (See WASHER FLUID-LEVEL SENSOR REMOVAL/INSTALLATION .)