Passenger Compartment Temperature Sensor Removal/Installation (Auto A/C)

Installation position 

Fig 1: Passenger Compartment Temperature Sensor

Courtesy of MAZDA MOTORS CORP.

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
2. Remove the following parts:
   1. Driver-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
   2. Driver-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
   3. Fuel filer lid opener lever (See FUEL-FILLER LID OPENER AND LEVER REMOVAL/INSTALLATION .)
   4. Hood release lever (See HOOD RELEASE LEVER AND RELEASE CABLE REMOVAL/INSTALLATION .)
   5. Driver-side lower panel (See DRIVER-SIDE LOWER PANEL REMOVAL/INSTALLATION .)
3. Disconnect the aspirator from the passenger compartment temperature sensor.
   Fig 2: Removing Aspirator From Passenger Compartment Temperature Sensor

   Courtesy of MAZDA MOTORS CORP.
4. Disconnect the passenger compartment temperature sensor connector.
5. Remove the screw.
   Fig 3: Removing Passenger Compartment Temperature Sensor With Screws

   Courtesy of MAZDA MOTORS CORP.
6. Remove the passenger compartment temperature sensor.
7. Remove the aspirator.
   Fig 4: Removing Aspirator

   Courtesy of MAZDA MOTORS CORP.
8. Install in the reverse order of removal.