LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-3 Touring, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> A/C Compressor >> Basic System - HVAC >> Resistor Removal/Installation

Resistor Removal/Installation

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
    2. Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION .)
  3. Disconnect the resistor connector.
    Fig 1: Resistor Connector
    G11431341Courtesy of MAZDA MOTORS CORP.
  4. Rotate the resistor (2) while pressing the tab (1).
    Fig 2: Rotating Resistor
    G11431342Courtesy of MAZDA MOTORS CORP.
  5. Remove the resistor.
    Fig 3: Removing Resistor
    G11431343Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals