LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-3 Touring, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Console Side Panel Removal/Installation >> Removal

Console Side Panel Removal/Installation: Removal

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Center console tray (See CENTER CONSOLE TRAY REMOVAL/INSTALLATION .)
    2. Shift bezel (See SHIFT BEZEL REMOVAL/INSTALLATION .)
    3. Upper panel (See UPPER PANEL REMOVAL/INSTALLATION .)
    4. Selector lever knob (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)
    5. Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION .)
  3. Pull the console side panel in the direction of the arrow shown in the figure and detach the clips and hooks from the front console.
    Fig 1: Pulling Console Side Panel
    G11434482Courtesy of MAZDA MOTORS CORP.
  4. Pull the console side panel in the direction of the arrow shown in the figure and remove it while releasing the rib.
scientia non olet · About LEMON Manuals