LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-3 Touring, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Console Side Panel Removal/Installation >> Installation

Console Side Panel Removal/Installation: Installation

  1. While inserting the console side panel rib into the clearance between the front console and the front console box, press in the console side panel in the direction of the arrow shown in the figure while fitting it to the front console box.
    Fig 1: Pressing Console Side Panel
    G11434483Courtesy of MAZDA MOTORS CORP.
  2. Align the installation positions of the clips and hooks, and install the console side panel in the direction of the arrow shown in the figure.
    Fig 2: Aligning Installation Positions Of Clips And Hooks
    G11434484Courtesy of MAZDA MOTORS CORP.
  3. Install the following parts:
    1. Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION .)
    2. Selector lever knob (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)
    3. Upper panel (See UPPER PANEL REMOVAL/INSTALLATION .)
    4. Shift bezel (See SHIFT BEZEL REMOVAL/INSTALLATION .)
    5. Center console tray (See CENTER CONSOLE TRAY REMOVAL/INSTALLATION .)
  4. Connect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
scientia non olet · About LEMON Manuals