LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> 6 Touring, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Air Bag System (Service Information) - Two-Step Deployment Control System) >> Crash Zone Sensor Removal/Installation [Two-Step Deployment Control System] >> Connector Disconnect Note

Connector Disconnect Note

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press the area (1) indicated by the arrow and slide it as shown in the figure (2).
    Fig 1: Detaching Connector
    G11539226Courtesy of MAZDA MOTORS CORP.
  2. Press the area (3) indicated by the arrow and disconnect the connector (4).