Clock Spring Adjustment [Two-Step Deployment Control System]

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Set the front wheels straight ahead.
CAUTION:
- The clock spring will break if over-wound. Do not forcibly turn the clock spring.
Turn the clock spring clockwise until it stops.

Fig 1: Adjusting Clock Spring (Two-Step Deployment Control System)
Courtesy of MAZDA MOTORS CORP.
Turn the clock spring counterclockwise approx. 2 turns.

Fig 2: Adjusting Clock Spring
Courtesy of MAZDA MOTORS CORP.
Align the mark on the clock spring with the mark on the outer housing.

Fig 3: Aligning Clock Spring And Outer Housing (1 Of 2)
Courtesy of MAZDA MOTORS CORP.

Fig 4: Aligning Clock Spring And Outer Housing (2 Of 2)
Courtesy of MAZDA MOTORS CORP.
NOTE:
- After adjusting the alignment marks, the guides can be verified in the viewing slots shown in the figure.