LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> 6 Touring, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Fuel System) >> Fuel-Filler Pipe Removal/Installation >> Dust Cover Removal Note

Dust Cover Removal Note

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear mudguard (LH). (See MUDGUARD REMOVAL/INSTALLATION .)
  2. Release the dust cover tab using a flathead screwdriver as shown in the figure.
  3. Remove the dust cover.
    Fig 1: Releasing Dust Cover Tab
    G09785321Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals