LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> 6 Sport, Standard Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Basic System - HVAC >> Front Heat Duct Removal/Installation >> Driver-side

Front Heat Duct Removal/Installation: Driver-side

  1. Remove the driver-side side wall. (See SIDE WALL REMOVAL/INSTALLATION .)
  2. Insert a flathead screwdriver in the position shown in the figure, lift it up in the direction of the arrow.
    Fig 1: Insert A Flathead Screwdriver To Front Heat Duct - Driver Side
    G09786863Courtesy of MAZDA MOTORS CORP.
  3. Detach the tab while lifting up the front heat duct in the direction of the arrow.
    Fig 2: Detaching Tab From Front Heat Duct - Driver Side
    G09786864Courtesy of MAZDA MOTORS CORP.
  4. Remove the front heat duct.
    Fig 3: Removing Front Heat Duct
    G09786865Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals