LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> 6 Sport, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical System >> Timing Chain Removal/Installation >> Cylinder Head Cover Removal Note

Cylinder Head Cover Removal Note

  1. Disconnect the OCV connector.
  2. Remove the wiring harness clips secured to the cylinder head cover.
  3. Remove the wiring harness clip secured to the intake manifold as shown in the figure, and set the wiring harness aside.
    Fig 1: Locating Wiring Harness Clip Of Intake Manifold
    G09785084Courtesy of MAZDA MOTORS CORP.
  4. Disconnect the ventilation hose.
  5. Disconnect the brake vacuum hose from the intake manifold and set it aside.
  6. Remove the catch tank with the evaporative hose still connected and set it aside. (See PURGE SOLENOID VALVE REMOVAL/INSTALLATION .)
  7. Remove the cylinder head cover.
scientia non olet · About LEMON Manuals