DTC U0300; U2100; Configuration Setting Invalid Or Not Set: Notes
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
- U0300:00: Configuration setting invalid
- U2100:00: Configuration not set
|
| Detection condition |
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- SAS control module configuration setting has not been set
- SAS control module configuration setting has not been done correctly
|
| Fail-safe function |
Not applicable |
| Possible cause |
- SAS control module configuration setting not implemented
- SAS control module configuration setting invalid
- SAS control module malfunction
|
| System wiring diagram |
Not applicable |