DTC B1226-55; B1227-55; Configuration Setting Error (Driver-Side And Passenger-SIDEPRESSURE Sensor Structural Malfunction): Notes
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
- B1226:55:Configuration setting error (driver-side pressure sensor structural malfunction)
- B1227:55:Configuration setting error (passenger-side pressure sensor structural malfunction)
|
| Detection condition |
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- SAS control module configuration setting has not been done correctly
- Parts which have not been set to SAS control module are assembled
|
| Fail-safe |
Not applicable |
| Possible cause |
- SAS control module configuration setting not implemented
- SAS control module configuration setting invalid
- Driver or passenger-side pressure sensor assembly incorrect
- SAS control module malfunction
|
| System wiring diagram |
Not applicable |