DTC B1206; B143A; B1A55; U2107; SAS Control Module Collision Judgement Signal Output Malfunction: Notes
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
- B1206:00:SAS control module collision judgement signal output (fuel cut signal output)
- B143A:00:SAS control module collision judgement signal output (collision detection signal output)
- B1A55:00:SAS control module collision judgement signal output (collision detection signal output)
- U2107:00:SAS control module collision judgement signal output (ESS request signal output)
|
| Detection condition |
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- SAS control module outputs collision judgement signal
|
| Fail-safe |
Not applicable |
| Possible cause |
- SAS control module operation (deployment)
- SAS control module outputs collision judgement signal
- SAS control module malfunction
|
| System wiring diagram |
Not applicable |