Recliner Motor Inspection

WARNING:

Handling a side air bag improperly can accidentally operate (deploy) the air bag, which may seriously injure you. Read the service warnings/cautions in the workshop service information before handling the front seat (side air bag integrated). (See AIR BAG SYSTEM SERVICE WARNINGS [TWO-STEP DEPLOYMENT CONTROL SYSTEM] .) (See AIR BAG SYSTEM SERVICE CAUTIONS [TWO-STEP DEPLOYMENT CONTROL SYSTEM] .) (See AIR BAG SYSTEM SERVICE WARNINGS [STANDARD DEPLOYMENT CONTROL SYSTEM] .) (See AIR BAG SYSTEM SERVICE CAUTIONS [STANDARD DEPLOYMENT CONTROL SYSTEM] .)

Disconnect the negative battery cable and wait for 1 min or more. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
Slide hooks A in the order of arrows (1), (2), (3) shown in the figure and disconnect them from hooks B.

Fig 1: Removing Recliner Motor
Courtesy of MAZDA MOTORS CORP.
Open fasteners.

Fig 2: Recliner Motor Fasteners Location
Courtesy of MAZDA MOTORS CORP.
Disconnect the recliner motor connector.
Apply battery positive voltage to the recliner motor terminals and inspect the front seat operation.

Fig 3: Applying Battery Positive Voltage To Recliner Motor Terminals
Courtesy of MAZDA MOTORS CORP.

If not as specified, replace the front seat back frame. (See FRONT SEAT BACK FRAME REMOVAL/INSTALLATION .)