On-Board Diagnostic - Blind Spot Monitoring Control Module

• Foreword [Blind Spot Monitoring (BSM) Control Module]
  • Notes
  • Troubleshooting Procedure
  • Action for Non-repeatable Malfunction
• Active Command Modes Inspection [Blind Spot Monitoring (BSM) Control Module]
• Active Command Modes Table [Blind Spot Monitoring (BSM) Control Module]
  • Blind Spot Monitoring (BSM) Control Module (LH)
  • Blind Spot Monitoring (BSM) Control Module (RH)
• Clearing DTC [Blind Spot Monitoring (BSM) Control Module]
  • CMDTC Memory Clearing Procedure
  • ODDTC Memory Clearing Procedure
• DTC B118C-11; Blind Spot Monitoring (BSM) Warning Light (LH) Circuit Malfunction
  • Notes
  • Diagnostic Procedure
• DTC B118C-15; Blind Spot Monitoring (BSM) Warning Light (LH) Circuit Malfunction
  • Notes
  • Diagnostic Procedure
• DTC B118D-11; Blind Spot Monitoring (BSM) Warning Light (RH) Circuit Malfunction
  • Notes
  • Diagnostic Procedure
• DTC B118D-15; Blind Spot Monitoring (BSM) Warning Light (RH) Circuit Malfunction
  • Notes
  • Diagnostic Procedure
• DTC Test
  • CMDTC Self Test
  • ODDTC Self Test
  • Snapshot Data
• DTC Table [Blind Spot Monitoring (BSM) Control Module]
  • Blind Spot Monitoring (BSM) Control Module (LH)
  • Blind Spot Monitoring (BSM) Control Module (RH)
• DTC U0010-88; U0100-00; U0155-00; U0214-00; Module Communication Errors
  • Notes
  • Diagnostic Procedure
• DTC U0232-00; Communication Error With Blind Spot Monitoring (BSM) Control Module (LH)
  • Notes
  • Diagnostic Procedure
• DTC U0233-00; Communication Error With Blind Spot Monitoring (BSM) Control Module (RH)
  • Notes
  • Diagnostic Procedure
• DTC U0401-68; Error Signal Received From Pcm
  • Notes
  • Diagnostic Procedure
• DTC U0420-68; Error Signal Received From Electric Power Steering (EPS) Control Module
  • Notes
  • Diagnostic Procedure
• DTC U0423-68; Error Signal Received From Instrument Cluster
  • Notes
  • Diagnostic Procedure
• DTC U0513-68; Error Signal Received From DSC HU/Cm
  • Notes
  • Diagnostic Procedure
• DTC U0515-68; Error Signal Received From Start Stop Unit
  • Notes
  • Diagnostic Procedure
• DTC U2300-54; Configuration Data Not Received From Instrument Cluster
  • Notes
  • Diagnostic Procedure
• DTC U2300-55; Instrument Cluster Configuration Not Implemented
  • Notes
  • Diagnostic Procedure
• DTC U2300-56; Configuration Data Unmatched With Instrument Cluster
  • Notes
  • Diagnostic Procedure
• DTC U2300-64; Instrument Cluster Configuration Error
  • Notes
  • Diagnostic Procedure
• DTC U3000-01; Electrical Malfunction Inside Blind Spot Monitoring (BSM) Control Module
  • Notes
  • Diagnostic Procedure
• DTC U3000-09; Blind Spot Monitoring (BSM) Control Module Internal Malfunction
  • Notes
  • Diagnostic Procedure
• DTC U3000-54; Radar Performance Malfunction
  • Notes
  • Diagnostic Procedure
• DTC U3000-97; Radar Performance Malfunction
  • Notes
  • Diagnostic Procedure
• DTC U3003-04; Instrument Cluster Configuration Error
  • Notes
  • Diagnostic Procedure
• DTC U3003-16; Blind Spot Monitoring (BSM) Control Module Low Power Supply Voltage Input (Less Than 7.321 V)
  • Notes
  • Diagnostic Procedure
• DTC U3003-17; Blind Spot Monitoring (BSM) Control Module High Power Supply Voltage Input (15.608 V Or More)
  • Notes
  • Diagnostic Procedure
• On-Board Diagnostic Wiring Diagram [Blind Spot Monitoring (BSM) Control Module]
• PID/Data Monitor Inspection [Blind Spot Monitoring (BSM) Control Module]
• PID/Data Monitor Table [Blind Spot Monitoring (BSM) Control Module]
  • Blind Spot Monitoring (BSM) Control Module (LH)
  • Blind Spot Monitoring (BSM) Control Module (RH)