LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> 5 GT, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle (Service Information)) >> Input/Turbine Speed Sensor Inspection >> Part Inspection

Part Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Measure resistance between input/turbine speed sensor terminals A and B.
    G13727436Courtesy of MAZDA MOTORS CORP.
    • If there is any malfunction, replace the input/turbine speed sensor.

    Input/turbine speed sensor resistance 

    250-600 ohms

scientia non olet · About LEMON Manuals