LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> 5 GS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transaxle Shift Mechanism) >> Selector Lever Inspection

Selector Lever Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Switch the ignition ON.
  2. Inspect the selector lever as follows:
    • If there is any malfunction, replace the selector cable. (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)
      1. Verify that the selector lever can be operated as shown in the figure.
        G13727558Courtesy of MAZDA MOTORS CORP.
      2. Verify that the selector lever can be operated smoothly.
scientia non olet · About LEMON Manuals