LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> 5 GS, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle (Service Information) >> Transaxle Fluid Temperature (TFT) Sensor Inspection >> Part Inspection

Part Inspection

  1. Put the TFT sensor into a beaker filled with ATF and gradually warm the ATF.
    G09132670Courtesy of MAZDA MOTORS CORP.
    WARNING:
    • Do not touch the ATF and beaker. Otherwise, it could cause severe burns or serious injury from the high temperature.
  2. Measure the resistance between coupler component terminals E and H.
    G13727496Courtesy of MAZDA MOTORS CORP.
    • If there is any malfunction, replace the coupler component.
scientia non olet · About LEMON Manuals