No. 3 Engine Mount Installation Note

NOTE:

If the No. 3 engine mount bracket and the engine are removed, retighten the No. 3 engine mount stud bolts.

Tighten the No. 3 engine mount stud bolts.

Courtesy of MAZDA MOTORS CORP.

Tightening torque

7-13 N.m {72-132 kgf.cm, 62-115 in.lbf}
Temporarily tighten the No. 3 engine mount installation bolts and nuts.
Tighten the No. 3 engine mount installation bolts and nuts in the order shown in the figure.

Fig 1: No. 3 Engine Mount Bolts And Nuts Tightening Sequence

Courtesy of MAZDA MOTORS CORP.

PART DESCRIPTION

No.	Tightening torque
1	75-104 N.m {7.7-10 kgf.m, 56-76 ft.lbf}
2	71-93 N.m {7.3-9.4 kgf.m, 53-68 ft.lbf}